โมเดลกระดาษ แบบ DIY รูปซูเปอร์ฮีโร่ สำหรับตกแต่งบ้าน แขวนผนัง
Age Range:> 14 years old
Type:Film
Fnished Product Size:
Spiderman 65*53*27CM
Ironman 65*52*24CM
Hulk 70*124*50CM
Captain America 70*53*28CM
Black Panther 65*49*28CM
Material: 21-60 sheets of Netherlands 200g/m2 EPS white card paper
Assembly Instructions:Chinese & English
Weight: 0.5kg
Difficulty: ☆☆ (6 star is max)
Warning:it is only paper
Note: 1 what you receive is not finished product it need you to cut paste and assemble it following the instructions.Papercard is not glossy.Iridescent paper with pearl luster
Guide to build: Basic steps to make Paper Models.
1) Cut out each part roughly.
2) Use a pencil to mark note softly behind each part to avoid disorder (Dont use a pen as it probably makes damaged trace on the front side).
3) Use Scissor or Craft Knife to cut parts precisely by following the outer edge. The level of precision affects the effect of combination. (Cut the most outer edge if the line is thick).
4) Smear white adhesive cement on one of the 2 parts which needed to be stuck together.
5) Stick them together until the cement bone-dry.
Suggested TIPS :
A. For Scissor cutting suggest not to push the Scissor but pull the paper.
B. To make the fold of parts better please put the part firmly on the table and put the ruler on that to fold the line. If you have to fold inside you could first fold it softly outside to make the trace and fold it back to inside then.
C. To make the curved parts better place the part on the corner of table then push and pull it back and forth.
D. To make parts like cylinder use tools such as pen to assist to make the curl more natural.
(4.5)
(4.91)
